Sail planner
Define an area, edit shade sail posts in a locked top view, then rotate the layout in 3D. Adjust positions and anchor heights independently.
Sail layout
Drag to rotate in 3D. Choose top view to move posts or add one along an edge. Scroll or use + / − to zoom.
Keep at least 3 posts.
Keyboard: arrow keys rotate in 3D or move the selected post by 0.1 m in top view. Delete removes the selected post. + / − zoom; Home fits the view.
- Posts
- 4
- Defined area
- 20 m²
- Height difference
- 0.7 m
Straight anchor-to-anchor spans
Spans include height differences and are shown in metres. The defined area is the ground rectangle, not fabric area or predicted shade coverage.
What this plan includes
One sail with a post at each anchor, starting with four posts. Add, move or delete posts to change its outline; at least three posts must remain. Top view locks the camera while you edit. New posts interpolate the height and lean of their neighbours. The 5° starting angle is a visual default, not an installation recommendation.
The surface is illustrative. Hardware allowances, fabric cut sizes, post lengths below ground, post sizing, foundations and wind loads are not calculated. Confirm your layout against the sail supplier’s installation requirements.